English

应用科学学报 ›› 2008, Vol. 26 ›› Issue (1): 51-51 .

• 论文 • 上一篇    下一篇

基于DGS结构的抑制谐波低通滤波器设计

戚玉洁 刘学观   

  1. 苏州大学 电子信息学院，江苏，苏州，215021
  • 收稿日期:2007-04-17 修回日期:2007-08-15 出版日期:2008-01-31 发布日期:2008-01-31

Design and Realization of Harmonic-Suppressed Low-Pass Filter Using Defected Ground Structure

Qi Yu-jie, Liu Xue-guan   

  1. School of Electronic and Information Engineering, Soochow University, Suzhou 215021, China
  • Received:2007-04-17 Revised:2007-08-15 Online:2008-01-31 Published:2008-01-31

被引次数

10

摘要： 运用DGS等效电路模型与HFSS三维全波仿真相拟合的方法提取出DGS的结构参数，并将该结构应用于交指椭圆函数低通滤波器中，提出了一种新型的DGS滤波器。将交指滤波器两侧馈线设计成阻抗补偿馈线结构，将确定了结构参数的DGS蚀刻于补偿线下方的接地层上，再通过HFSS三维仿真进行匹配优化，得到了通带平坦、阻带宽、结构紧凑的DGS滤波器。实际制作的滤波器测试与仿真结果基本吻合，对谐波具有良好的抑制作用。

关键词: 椭圆函数滤波器, 分布元件, 缺陷地结构（DGS）, 抑制谐波, 低通滤波器

Abstract: This paper presents a method to use the equivalent-circuit model and 3-D model simulation for the DGS to extract the dimension parameters. Combining an inter-digital elliptic-function low-pass filter with the DGS structure, a novel filter is proposed. A compensated feed-line structure on the side of the inter-digital elliptic-function low-pass filter is designed, and a couple of suitable DGSs are etched under compensated lines. Furthermore, full-wave simulation and optimization of the proposed filter are obtained with HFSS to get better impedance match. The design gives performances of a flat passband, a wide stopband and a compact structure. Agreement between experimental results and measurements shows validity of the DGS filter, which has good harmonic-suppressed characterizes.

Key words: elliptic-function filter, distributed element, defected ground structure (DGS), harmonic suppress, low-pass filter