提高聚甲醛复合材料耐磨性的正交试验研究

应用科学学报 ›› 2004, Vol. 22 ›› Issue (2): 233-237.

提高聚甲醛复合材料耐磨性的正交试验研究

龙春光, 王霞瑜

湘潭大学高分子科学与工程系湖南湘潭 411200

收稿日期:2002-11-26 修回日期:2003-03-25 出版日期:2004-06-30 发布日期:2004-06-30
作者简介:龙春光(1965-),男,湖南淑浦人,副教授,博士.
基金资助:
湘潭大学博士基金;湖南省教育厅资助项目(01C352)

A Orthogonal Experiment Study of Enhancing the Wear-Resistance of Polyoxymethylene Composite

LONG Chun-guang, WANG Xia-yu

Department of Polymer Science and Engineering, Xiangtan University, Xiangtan 411200, China

Received:2002-11-26 Revised:2003-03-25 Online:2004-06-30 Published:2004-06-30

摘要/Abstract

摘要： 用正交试验设计方法和转矩流变仪共混-模压成型方法制备了Ekonol/G/POM复合材料,通过方差和极差分析方法对材料的耐磨性能进行了研究.结果表明:用正交设计方法设计制备Ekonol/G/POM复合材料可大大减少实验次数,提高工作效率;方差分析和极差分析结果一致:即Ekonol的含量对复合材料的耐磨性影响最大,其次是冷却方式.

关键词: 正交设计, 聚甲醛复合材料, 耐磨性

Abstract: The Ekonol/G/POM composite was prepared by means of the orthogonal experiment design and the torque rheometer blending-compressing model method. A study has carried out on the wear resistance of the material through the analyses of variance and range. The results show that preparing Ekonol/G/POM composite by the orthogonal design can greatly reduce the number of experiments, and enhance the work efficiency. Both the analyses of the variance and range have come to the same conclusion that the Ekonol content is the most important factors to affect the wear resistance of the composite, while the cooling method comes next.

Key words: orthogonal design, polyoxymethylene composite, wear-resistance

中图分类号:

龙春光, 王霞瑜. 提高聚甲醛复合材料耐磨性的正交试验研究[J]. 应用科学学报, 2004, 22(2): 233-237.

LONG Chun-guang, WANG Xia-yu. A Orthogonal Experiment Study of Enhancing the Wear-Resistance of Polyoxymethylene Composite[J]. Journal of Applied Sciences, 2004, 22(2): 233-237.