应用科学学报 ›› 2022, Vol. 40 ›› Issue (2): 179-189.doi: 10.3969/j.issn.0255-8297.2022.02.001

• 通信工程 • 上一篇    

基于数字全息显微技术的光聚合物折射率测量

李伟霞1,2, 黄素娟1,2, 闫成1,2, 夏胜利1,2, 尹伟豪1,2   

  1. 1. 上海大学 特种光纤与光接入网重点实验室, 上海 200444;
    2. 上海大学 特种光纤与先进通信国际合作联合实验室, 上海 200444
  • 收稿日期:2021-04-21 发布日期:2022-04-01
  • 通信作者: 黄素娟,教授,博导,研究方向为光电信息处理。E-mail:sjhuang@shu.edu.cn E-mail:sjhuang@shu.edu.cn
  • 基金资助:
    国家自然科学基金(No. 62075125);上海市科委科研计划项目(No. 20DZ2204900, No. 19DZ2294000);高等学校学科创新引智计划(No. D20031)资助

Refractive Index Measurement of Photopolymer Based on Digital Holographic Microscopy

LI Weixia1,2, HUANG Sujuan1,2, YAN Cheng1,2, XIA Shengli1,2, YIN Weihao1,2   

  1. 1. Key Laboratory of Specialty Fiber Optics and Optical Access Networks, Shanghai University, Shanghai 200444, China;
    2. Joint International Research Laboratory of Specialty Fiber Optics and Advanced Communication, Shanghai University, Shanghai 200444, China
  • Received:2021-04-21 Published:2022-04-01

摘要: 提出了一种基于数字全息显微技术(digital holographic microscopy,DHM)的光聚合物折射率测量方法。采用马赫-曾德尔离轴干涉系统记录光聚合物的数字全息图,用混合重建算法提取高精度的相位分布。结合光学轮廓仪测量的光聚合物的形貌分布,通过图像配准得到光聚合物的折射率分布。定量分析了光聚合物在紫外固化过程中的折射率变化,利用DHM获取光聚合物的动态相位分布,进而得到光聚合物的动态折射率分布,绘制了平均折射率随曝光时间的变化曲线。该方法可用于揭示微光学元件的光学性能,以设计高质量微光学系统。

关键词: 数字全息显微技术, 全息图, 相位提取, 光聚合物折射率, 紫外固化过程

Abstract: A method based on the digital holographic microscopy (DHM) for measuring the refractive index of photopolymer is proposed. The digital hologram is recorded by the Mach-Zehnder off-axis interference system. The high-precision phase distribution is extracted by the hybrid reconstruction algorithm. Combining the profile distribution measured by optical profilometer, the refractive index of photopolymer is obtained by image registration. The evolution of refractive index of photopolymer during the UV curing process is quantitatively analyzed. The dynamic phase distribution of photopolymer is measured by DHM, and then the dynamic refractive index distribution is obtained. The relationship between the average refractive index and exposure time is plotted. The proposed method can be used to reveal the optical performance of microscopic optical devices and design high-quality optical systems.

Key words: digital holographic microscopy(DHM), hologram, phase extraction, refractive index of photopolymer, UV curing process

中图分类号: