English

应用科学学报 ›› 1996, Vol. 14 ›› Issue (1): 119-126.

• 论文 • 上一篇    

在五坐标专用数控磨床上特种回转面刀具的成形原理

刘鹄然   

  1. 湖北工学院
  • 收稿日期:1993-12-03 修回日期:1994-04-11 出版日期:1996-03-31 发布日期:1996-03-31
  • 作者简介:刘鹄然:教授,湖北工学院,武汉 430068

THE FORMING THEORIES OF ROTARY TOOLS ON FIVE-AXIS NUMERICALLY CONTROLLED GRINDER

LIU HURAN   

  1. Hubei Institute of Technology
  • Received:1993-12-03 Revised:1994-04-11 Online:1996-03-31 Published:1996-03-31

PDF

63

被引次数

15

摘要： 该文研究了在五坐标专用数控工具磨床上加工特种回转面刀具的精确理论,导出了工艺系统运动函数非线性方程组.刀槽前后刀面是在一次走刀中同时形成的,并保证等法向前角.

关键词: 数控, 切削刀具, 成形

Abstract: This thesis researched the foraging theories of rotary cutting tools on the fiveaxis numerically controlled grinder,and deduced the nonlineal equation systems of the relative movement satisfied by the banding wheel and the work.The groove was formed in one awoke,while the normal rake angle remained constant.

Key words: numerically controlled machining, formation, cutting tools