信号与信息处理

仿造数码迷彩的设计方法

展开
  • 西安工业大学计算机科学与工程学院,西安710032
喻钧,副教授,研究方向:图像处理和模式识别、迷彩伪装,E-mail: jyu0117@163.com

收稿日期: 2011-11-11

  修回日期: 2012-06-11

  网络出版日期: 2012-07-25

基金资助

陕西省教育厅专项科研项目基金(No.11JK1043);总后基建营房部科研项目基金(No.AY107C001)资助

Design of Imitation Digital Camouflage

Expand
  • School of Computer Science and Engineering, Xi’an Technological University, Xi’an 710032, China

Received date: 2011-11-11

  Revised date: 2012-06-11

  Online published: 2012-07-25

摘要

摘要: 提出一种根据目标背景图像生成仿造数码迷彩的设计方法. 首先将背景图案进行颜色空间转换,采用K均值聚类分析方法提取背景主色. 由侦测距离确定数码单元的最小尺寸,最后生成数码迷彩斑块. 迷彩的伪装效果通过Canny 边缘检测算子进行评估. 实验结果表明,利用该方法生成的仿造数码迷彩可有效改变目标的原有轮廓,使之更好地与周围背景相融合,达到良好的伪装效果.
关键词:

本文引用格式

喻钧, 双晓 . 仿造数码迷彩的设计方法[J]. 应用科学学报, 2012 , 30(4) : 331 -334 . DOI: 10.3969/j.issn.0255-8297.2012.04.001

Abstract

The paper proposes a new method of generating imitation digital camouflage based on the background images. First, convert the color space of the background pattern. Dominant colors are extracted using the K-means clustering analysis. The minimum size of digital unit is determined by the detection distance. Finally, the digital camouflage spots are generated. The effect of camouflage is assessed by Canny edge detection. Experimental result shows that the generated digital camouflage can effectively change the original contour of the target, and can be perfectly blended with the background to achieve a good camouflage effect.

文章导航

/