English

应用科学学报 >

2016 , Vol. 34 >Issue 1: 106 - 114

DOI: https://doi.org/10.3969/j.issn.0255-8297.2016.01.012

信号与信息处理

钢桥疲劳裂缝的红外热成像无损检测

展开
  • 武汉科技大学汽车与交通工程学院, 武汉 430081

收稿日期: 2015-05-19

  修回日期: 2015-09-05

  网络出版日期: 2016-01-30

基金资助

国家自然科学基金(No.51578430);湖北省教育厅科学技术研究计划优秀中青年人才项目基金(No.Q20121109);湖北省交通运输厅科技项目基金(No.2014-721-1-9)资助

收起

Nondestructive Inspection of Steel Bridge Based on Infrared Thermal Imaging

Expand
  • College of Automobile and Traffic Engineering, Wuhan University of Science and Technology, Wuhan 430081, China

Received date: 2015-05-19

  Revised date: 2015-09-05

  Online published: 2016-01-30

Fold

摘要

利用裂缝尖端应力集中的特点,提出一种钢桥疲劳裂缝无损检测方法.从理论上建立钢结构表面温度变化与其应力之间的本构关系模型,在实验中采用红外热成像法测试构件孔边畸变温度,计算构件相应点处的畸变应力,确定构件裂缝.以带孔平板为例,应用上述模型分析了周期荷载作用下圆孔周边点的应力和表面温度之间的关系.实验结果显示,当t=0.05 s时,圆孔左右节点温度降低达到最小值,上下节点温度升高达到最大值;当t=0.15 s时,左右节点温度升高达到最大值,上下节点温度降低达到最小值.实验结果符合理论模型,表明该检测方法可行.

关键词： 钢桥; 疲劳裂缝; 应力集中; 红外热成像; 无损检测

本文引用格式

严园, 邹兰林, 周兴林 . 钢桥疲劳裂缝的红外热成像无损检测[J]. 应用科学学报, 2016 , 34(1) : 106 -114 . DOI: 10.3969/j.issn.0255-8297.2016.01.012

Abstract

A new inspection method is proposed to detect fatigue crack on steel bridges based on stress concentration features. The relationship between stress and temperature of the component is built theoretically. Fatigue cracks can be located by calculating distortion stress based on detection of temperature distortion of the component using an infrared thermal imager. As an example, consider a plate with a hole. Relationship between stress and temperature of the hole-edge spots is studied under cycle loads. The results show that the temperature of left/right spots decrease and top/bottom spots increase when t=0.05 s, and the temperature of left/right spots increase and top/bottom spots decrease when t=0.15 s. These agree with the theoretical result, and the mode test results show feasibility of the proposed method.

Key words： steel bridge; fatigue cracks; stress concentration; infrared thermal imaging; nondestructive testing

参考文献

[1] 朱劲松,郭耀华. 正交异性钢桥面板疲劳裂纹扩展机理及数值模拟研究[J]. 振动与冲击,2014, 33(14):40-47. Zhu J S, Guo Y H. Numerical simulation on fatigue crack growth of orthotropic steel highway bridge deck[J]. Journal of Vibration and Shock, 2014, 33(14):40-47. (in Chinese)

[2] 王莹,李兆霞,赵丽华. 大跨钢桥钢箱梁损伤时变模型及疲劳可靠性评估[J]. 东南大学学报:自然科学版,2013, 43(5):1017-1023. Wang Y, Li Z X, Zhao L H. Time-varying damage model and fatigue reliability assessment for box-girder of long-span steel bridge[J]. Journal of Southeast University:Natural Science Edition, 2013, 43(5):1017-1023. (in Chinese)

[3] 顾萍,裴辉腾,盛博. U肋带内隔板钢桥面疲劳性能研究[J].同济大学学报:自然科学版,2014, 42(10):1499-1504. Gu P, Pei H T, Sheng B. Fatigue performance of orthotropic steel bridge decks with inner diaphragm in U-rib[J].Journal of Tongji University:Natural Science, 2014, 42(10):1499-1504.(in Chinese)

[4] 范晋祥,杨建宇. 红外成像探测技术发展趋势分析[J]. 红外与激光工程,2012, 41(12):3145-3153. Fan J X. Yang J Y. Development trends of infrared imaging detecting technology[J]. Infrared and Laser Engineering, 2012, 41(12):3145-3153. (in Chinese)

[5] Bouc R, Nayrolcs B.固体红外热像测试方法和结果[J].力学进展,1987, 17:551-557. Bouc R, Nayrolcs B.A method & the result for the infrared thermographic of solid[J].Advances in Mechanics, 1987, 17:551-557.(in Chinese)

[6] 薛书文,雷雨,陈习权,祖小涛. 脉冲红外热成像无损检测的物理检测机理[J]. 电子科技大学学报,2005, 34(3):320-325 Xue S W, Lei Y, Chen X Q, Zu X T. Physical basis and detecting principles of thermal pulse video thermography nondestructive testing[J]. Journal of University of Electronic Science and Technology of China, 2005, 34(3):320-325. (in Chinese)

[7] 魏凌霄,闫志峰,王文先,张红霞,王凯. 基于红外热成像的镁合金疲劳裂纹扩展的研究[J]. 机械工程学报,2012, 48(6):64-70. Wei L X, Yan Z F, Wang W X, Zhang H X, Wang K. Study on fatigue crack propagation of AZ31B magnesium alloy based on infrared thermo graphic technology[J].Journal of Mechanical Engineering, 2012, 48(6):64-70. (in Chinese)

[8] 曾伟,韩旭,丁桦,刘浩. 基于红外热像技术的金属材料疲劳性能研究方法[J]. 机械强度,2008, 30(4):658-663. Zeng W, Han X, Ding H, Liu H. Fatigue characteristics evaluation of metals based on infrared thermo graphic technique[J]. Journal of Mechanical Strength, 2008, 30(4):658-663. (in Chinese)

[9] 郭杏林,王晓钢. 基于锁相热象法的金属疲劳特性评估方法研究[J]. 机械强度,2010, 32(2):305-309. Guo X L, Wang X G. Research on the evaluation method of metal fatigue properties based on lock-in thermography[J]. Journal of Mechanical Strength, 2010, 32(2):305-309. (in Chinese)

[10] 游安清,程义民,赵平,郭从良. 红外图像去噪中形态学结构元素的选取[J].应用科学学报,2004, 22(4):483-486. You A Q, Cheng Y M, Zhao P, Guo C L. The selection of morphological structural elements for removing noise in infrared images[J]. Journal of Applied Sciences, 2004, 22(4):483-486. (in Chinese)

[11] Diaz F A, Patterson E A, Tomlinson R A, Yates J R. Measuring stress intensity factors during fatigue crack growth using thermo elasticity[J]. Fatigue & Fracture of Engineering Materials & Structures, 2004, 27:571-583.

[12] 冯立强,王欢祥,晏大伟,刘吉林. 建筑外墙饰面层内部缺陷红外热像法检测试验研究[J].土木建筑与环境工程,2014, 36(2):57-61. Feng L Q, Wang H X, Yan D W, Liu J L. Experimental analysis of infrared thermography for detecting internal defects of decorative layer on exterior wall[J]. Journal of Civil, Architectural & Environmental Engineering, 2014, 36(2):57-61. (in Chinese)

[13] Lehmann B, Ghazi W K, Frank T, Vera C B, Tanner C. Effects of individual climatic parameters on the infrared thermography of buildings[J]. Applied Energy, 2013, 110:29-43.

[14] Albatici R, Tonelli A M, Michela C. A comprehensive experimental approach for the validation of quantitative infrared thermography in the evaluation of building thermal transmittance[J]. Applied Energy, 2015, 141:218-228

[15] Keshavrzi S, Bolour A, Mendez K, Behrouzi B, Kasasbeh A S, Levy M L. Thermal properties of contemporary bipolar systems using infrared imaging[J]. World Neurosurgery, 2015, 83(3):376-381.

[16] Kylili A, Fokaidesp A, Christou P, Kalogirou S A. Infrared thermography (IRT) applications for building diagnostics:a review[J]. Applied Energy, 2014, 134:531-549.
Options
文章导航

/

〈 〉