Journal of Applied Sciences ›› 2020, Vol. 38 ›› Issue (6): 843-852.doi: 10.3969/j.issn.0255-8297.2020.06.001

• Communication Engineering • Previous Articles    

Three-Dimensional Tension Sensor of Fiber Bragg Grating

XIE Kai1,2, TAN Tao1,2, SI Xuezhen1, Lü Zhongbin1, REN Pengliang1, QIU Chengjun2, DUAN Chao2, TIAN Ye2, CHAI Quan2, GAO Fei3, ZHANG Jianzhong2   

  1. 1. State Grid Henan Electric Power Corporation Electric Power Research Institute, Zhengzhou 450052, Henan, China;
    2. Key Laboratory of In-Fiber Integrated Optics of the Ministry of Education, Harbin Engineering University, Harbin 150001, Heilongjiang, China;
    3. Systems Engineering Research Institute of China State Shipbuilding Cooperation, Beijing 100094, China
  • Received:2020-07-27 Published:2020-12-08

Abstract: A three-dimensional tension sensor based on fiber Bragg grating sensing technology is designed to monitor the stress state of substation bushing. In combination with finite element simulation and experiment, the three-dimensional tension sensor is implemented and signal demodulation is realized. It is shown that the tension sensitivities in three directions of the sensor are all between 0.01με·N-1 and 0.02 με·N-1, loading test results are basically consistent with the values of added load, and the average error of the sensor is 5.13% for the load of 0~600N. Therfore, the proposed tension sensor based on fiber Bragg grating is applicible in the measurement of three-dimensional tension with high accuracy.

Key words: fiber Bragg grating, three-dimensional tension sensor, high substation, voltage bushing

CLC Number: