Communication Engineering

Optimization of Electronic Control Scheme of Multi-layer Phase-Modulated Surface and Its Influence on Scattering Properties

Expand
  • College of Telecommunications and Information Engineering, Nanjing University of Posts and Telecommunications, Nanjing 210003, China

Received date: 2015-11-11

  Revised date: 2016-01-04

  Online published: 2016-05-30

Abstract

To improve absorbing properties of phase-modulated surface (PMS), a method for optimizing the switching scheme of PMS using a differential evolution (DE) algorithm is proposed. The number of active layers in PMS is increased. Scattering properties of PMS are theoretically studied using a time-modulation theory. The switching scheme of PMS is optimized using the DE algorithm. The results indicate that the optimized switching scheme can minimize the spatial coverage of scattered echo at the incident frequency. The effect is further enhanced as the number of active layers in PMS increases. The floor effect occurs when the number of active layers reaches a certain value, limiting the PMS structure conversely. This research is meaningful for the design of PMS by balancing its absorbing properties and structure complexity.

Cite this article

FU Yi, HONG Tao . Optimization of Electronic Control Scheme of Multi-layer Phase-Modulated Surface and Its Influence on Scattering Properties[J]. Journal of Applied Sciences, 2016 , 34(3) : 237 -250 . DOI: 10.3969/j.issn.0255-8297.2016.03.001

References

[1] Nair R U, Jha R M. Broadbanding of a-sandwich radome using Jerusalem cross frequency selective surface[J]. CMC:Computers, Materials & Continua, 2013, 37(2):109-121.
[2] Sazegar M, Zheng Y, Kohler C, Maune H, Nikfalazar M, Binder J R. Beam steering transmit array using tunable frequency selective surface with integrated ferroelectric varactors[J]. IEEE Transactions on Antennas and Propagation, 2012, 60(12):5690-5699.
[3] Wu P, Bai F, Xue Q, Liu X, Hui S Y R. Use of frequency-selective surface for suppressing radio-frequency interference from wireless charging pads[J]. IEEE Transactions on Industrial Electronics, 2014, 61(8):3969-3977.
[4] Tennant A, Chambers B. A single-layer tunable microwave absorber using an active FSS[J]. IEEE on Microwave and Wireless Components Letters, 2004, 14(1):46-47.
[5] Chambers B, Tennant A. The phase-switched screen[J]. IEEE on Antennas and Propagation Magazine, 2004, 46(6):23-37.
[6] Chambers B, Tennant A. A smart radar absorber based on the phase-switched screen[J]. IEEE Transactions on Antennas and Propagation, 2005, 53(1):394-403.
[7] Tennant A, Chambers B. Experimental performance of a phase-switched screen against modulated microwave signals[J]. IEE Proceedings-Radar, Sonar and Navigation, 2005, 152(1):29-33.
[8] Chambers B, Tennant A. FDTD modelling of active radar absorbers[C]//IEEE Transactions on Antennas and Propagation Society International Symposium, 2007:6027-6030.
[9] Tennant A, Chambers B. Time-switched array analysis of phase-switched screens[J]. IEEE Transactions on Antennas and Propagation, 2009, 57(3):808-812.
[10] Chambers B, Tennant A. Reflectivity null tuning in multi-layer phase-switched active radar absorbers[J]. IEE Proceedings-Radar, Sonar and Navigation, 2005, 152(4):245-247.
[11] Tennant A, Chambers B. Experimental two-layer adaptive phase-switched screen[J]. Electronics Letters, 2001, 37(23):1379-1380.
[12] Tennant A, Chambers B. RCS reduction of spiral patch antenna using a PSS boundary[J]. IEE Proceedings-Radar, Sonar and Navigation, 2005, 152(4):248-252.
[13] Tennant A, Chambers B. SSB-type frequency scattering from a single-layer PSS with interlaced element modulation[J]. IEEE on Antennas and Wireless Propagation Letters, 2006, 5(1):284-285.
[14] Tennant A, Chambers B. In-phase and quadrature modulated scatterer[J]. Electronics Letters, 2002, 38(11):498-499.
[15] Chambers B, Tennant A, Melnikov A. Detection of a radar signal reflected from a phasemodulated surface[J]. IEE Proceedings-Radar, Sonar and Navigation, 2006, 153(4):316-324.
[16] Balci O, Polat E O, Kakenov N, Kocabas C. Graphene-enabled electrically switchable radar-absorbing surfaces[J]. Nature Communications, 2014, 6:6628-6628.
[17] Zabri S N, Cahill R, Conway G, Schuchinsky A. Ink jet printing of resistively loaded FSS for microwave absorbers[J]. Electronics Letters, 2015, 51(13):999-1001.
[18] Xia T, Cao Y, Oyler N A, Lei L, Chen X. Strong microwave absorption of hydrogenated wide bandgap semiconductor nanoparticles[J]. ACS Applied Materials & Interfaces, 2015, 7(19):10407-10413.
[19] Chambers B, Tennant A. Reflection of radar signals from multiple phase-modulated surfaces[J]. IET Radar, Sonar & Navigation, 2007, 1(2):142-148.

Outlines

/