[1] 于红英,曾重元,郭震. 少自由度变胞并联机构综合设计方法[J]. 哈尔滨工业大学学报, 2018, 50(1):42-49. Yu H Y, Zhang Z Y, Guo Z. Type synthesis method of lower-mobility metamorphic parallel mechanism[J]. Journal of Harbin Institute of Technology, 2018, 50(1):42-49. (in Chinese) [2] Qu H, Guo S. Topology and mobility variations of novel redundant reconfigurable parallel mechanism[M]. Chan:Springer International Publishing, 2016:223-233. [3] Hu J P, Yan X Y, Ma J, Qi C H, Kumi F, Mao H P. Dimensional synthesis and kinematics simulation of a high-speed plug seeding transplanting robot[J]. Computers & Electronics in Agriculture, 2014, 107(3):64-72. [4] Mousavi M A, Masouleh M T, Karimi A. On the maximal singularity free ellipse of planar 3-RPR parallel mechanisms via convex optimization[J]. Robotics and Computer-Integrated Manufacturing, 2014, 30(2):218-227. [5] 张东胜,许允斗,侯照伟,姚建涛,赵永生. 五自由度混联机器人优化设计与运动学分析[J]. 农业工程学报,2016, 32(24):69-76. Zhang D S, Xu Y D, Hou Z W, Yao J T, Zhao Y S. Optimal design and kinematics analysis of 5-DOF hybrid serial-parallel manipulator[J]. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32(24):69-76. (in Chinese) [6] 刘霞,单宁. 3-RRR平面并联机构模糊PID控制系统研究[J]. 机械科学与技术,2018, 37(6):854-858.Liu X, Shan N. Research of fuzzy-PID control system for 3-RRR planar parallel mechanism[J]. Mechanical Science and Technology for Aerospace Engineering, 2018, 37(6):854-858. (in Chinese) [7] 赵磊,梁超,张德福,东立剑,彭海峰. 基于3-RRR结构的光学元件柔顺微动调整机构的位姿正解[J]. 光学精密工程,2016, 24(6):1373-1381. Zhao L, Liang C, Zhang D F, Dong L J, Peng H F. Forward kinematics of 3-RRR flexure parallel mechanism used in lens micro-adjustment[J]. Optics and Precision Engineering, 2016, 24(6):1373-1381. (in Chinese) [8] 秦绍辉,胥光申,沈丹峰,巨孔亮,陈振,赵刚. 基于LabVIEW的喷气织机综合性能测试系统[J]. 西安工程大学学报,2016, 30(1):107-111. Qin S H, Xu G S, Shen D F, Ju K L, Chen Z, Zhao G. Comprehensive performance test system of air-jet loom based on LabVIEW[J]. Journal of Xi'an Polytechnic University, 2016, 30(1):107-111. (in Chinese) [9] 董祥见,陆洋. 基于LabVIEW的电控旋翼测控系统设计[J]. 南京航空航天大学学报,2017, 49(2):251-257. Dong X J, Lu Y. Design of measurement and control system for electrically controlled rotor based on LabVIEW[J]. Journal of Nanjing University of Aeronautics & Aeronautics, 2017, 49(2):251-257. (in Chinese) [10] 张津瑞,肖渊,申松,刘金玲,吴姗. 气动式微滴喷射控制系统的设计与实现[J]. 西安工程大学学报,2017, 31(1):95-100. Zhang J R, Xiao Y, Shen S, Liu J L, Wu S. Design and implementation of control system for pneumatic driven micro-droplet jetting generator[J]. Journal of Xi'an Polytechnic University, 2017, 31(1):95-100. (in Chinese) [11] 刘霞,单宁,王治晶. 非致命激光武器雨雾传输衰减控制虚拟仪器研究[J]. 应用科学学报,2018, 36(3):535-541. Liu X, Shan N, Wang Z J. Research of control virtual instrument on non-lethal laser weapon transmitting and attenuating in the rain and fog[J]. Journal of Applied sciences, 2018, 36(3):535-541. (in Chinese) |