极点迭代法——一个求最小条件平面度误差的快速、精确算法

应用科学学报 ›› 1997, Vol. 15 ›› Issue (1): 34-40.

极点迭代法——一个求最小条件平面度误差的快速、精确算法

刘正士¹, 周一放²

1. 合肥工业大学;
2. 安庆石化总厂职工大学

收稿日期:1995-05-05 修回日期:1995-12-01 出版日期:1997-03-31 发布日期:1997-03-31
作者简介:刘正士:副教授,合肥工业大学机械工程系,合肥 230009

POLE ITERATION METHOD-A FAST AND ACCURATE ALGORITHM FOR CALCULATING FLATNESS ERROR

LIU ZHENGSHI¹, ZHOU YIFANG²

1. Hefei University of Technology, Hefei 230009;
2. Staff and Workers University of Anqing Pero-Chemical Works, Anqing 246002

Received:1995-05-05 Revised:1995-12-01 Online:1997-03-31 Published:1997-03-31

摘要/Abstract

摘要： 在文献[3]、[6]的基础上提出了最小条件平面度误差的一种新算法。新算法在计算的主要过程中仅对每行的极值点进行迭代计算,在计算效率方面显著优于已有的算法。尤适宜于处理较大型的问题。

关键词: 平面度误差, 极点迭代

Abstract: A new algorithm for minimum condition flatness error is proposed in this paper based upon the references[3] and[5].Only a few poles of every row are iterated in main computation procedure of the algorithm.Therefore,the efficiency of computation of this method is higher than those by using other methods, and it is suitable to deal with more complex problems especially.

Key words: pole iteration, flatness error

刘正士, 周一放. 极点迭代法——一个求最小条件平面度误差的快速、精确算法[J]. 应用科学学报, 1997, 15(1): 34-40.

LIU ZHENGSHI, ZHOU YIFANG. POLE ITERATION METHOD-A FAST AND ACCURATE ALGORITHM FOR CALCULATING FLATNESS ERROR[J]. Journal of Applied Sciences, 1997, 15(1): 34-40.