English

应用科学学报 ›› 1999, Vol. 17 ›› Issue (2): 127-133.

• 论文 •    下一篇

五坐标曲面加工行距控制的新方法

周艳红, 周济   

  1. 华中理工大学
  • 收稿日期:1997-10-22 修回日期:1998-04-01 出版日期:1999-06-30 发布日期:1999-06-30
  • 基金资助:
    国家“八五”科技攻关专题及国家自然科学基金资助项目

A New Method for the Determination of Path Interval in Five-Axis NC Machining of Free Form Surfaces

ZHOU YANHONG, ZHOU JI   

  1. Huazhong University of Science and Technology, Wuhan 430074
  • Received:1997-10-22 Revised:1998-04-01 Online:1999-06-30 Published:1999-06-30

PDF

64

被引次数

5

摘要： 运用刀具包络运动分析方法,得出了五坐标联动曲面加工中较严密的走刀行距的计算表达式,并给出了实用的求解算法和提高计算效率的措施.在此基础上,分析了五坐标曲面加工中影响走刀行距的因素,探讨了优化走刀路线的措施.

关键词: 五坐标, 曲面加工, 包络原理, 行距, 刀具轨迹

Abstract: In this paper, a rigorous expression for calculating the path interval, which is based on analyzing the enveloping movement of cutters is obtained and is fit for five-axis NC machining of free form surfaces with general torus cutters. The practical algorithm and measures for improving the calculating efficiency are given. The factors that influence the path interval in five-axis surface machining are discussed, and the approaches to optimizing the tool path are also explored.

Key words: surface machining, path interval, enveloping theory, tool path, five-axis