English

应用科学学报 ›› 2000, Vol. 18 ›› Issue (2): 161-163.

• 论文 • 上一篇    下一篇

新型超声振动切削装置研究

温任林1, 颜景平2   

  1. 1. 无锡威孚集团有限公司, 江苏无锡 214031;
    2. 东南大学机械系, 江苏南京 210096
  • 收稿日期:1998-12-31 修回日期:1999-06-08 出版日期:2000-06-30 发布日期:2000-06-30
  • 作者简介:温任林(1966-),男,福建永泰人,工程师,博士;颜景平(1935-),男,江苏南京人,教授,博导.
  • 基金资助:
    江苏省科委应用基础基金资助项目(BJ95033)

Study on a New Ultrasonic Vibration Cutting lnstrument

WEN Ren-lin1, YAN Jing-ping2   

  1. 1. Wuxi Weifu Group Co. LTD., Wuxi 214031, China;
    2. Department of Mechanical Engineering, Southeast University, Nanjing 210096, China
  • Received:1998-12-31 Revised:1999-06-08 Online:2000-06-30 Published:2000-06-30

PDF

59

被引次数

3

摘要： 分析并计算了超声振动切削所需的功率,提出了采用高效的压电换能器以及直接驱动刀具振动的新型超声振动切削装置进行超声切削的新方法,实验结果表明,该方法能有效地提高机械精密加工表面质量和精度.

关键词: 超声振动, 压电换能器, 功率, 切削装置

Abstract: Power of ultrasonic vibration cutting (UVC) is analysed and calculated. The author suggests a new method, in which a new vibration cutting instrument equipped with a piezoelectric transducer and cutting tools driven directly is adopted. Experimental results show that this method can improve the surface quality and precision of precision machining.

Key words: piezoelectric transducer, ultrasonic vibration, cutting instrument, power

中图分类号: