English

应用科学学报 ›› 2001, Vol. 19 ›› Issue (2): 107-112.

• 论文 • 上一篇    下一篇

低频超声类兰姆波超薄黏结复合结构定征方法

张锐1, 万明习1, CAO Wen-wu2   

  1. 1. 西安交通大学电子与信息工程学院生物医学工程与仪器系, 陕西西安 710049;
    2. Intercollege Materials Research Laboratory Pennsylvania State University, University Park, PA 16802
  • 收稿日期:2000-01-06 修回日期:2000-05-14 出版日期:2001-06-30 发布日期:2001-06-30
  • 作者简介:张锐(1973-),男,陕西西安人,博士;万明习(1962-),男,湖北天门人,教授,博导;CAO Wen-wu(1957-),男,吉林长春人,教授,博导.
  • 基金资助:
    国家自然科学基金(69631020);美国Office of Naval Research (Grant:#N00014-93-1-0340)资助项目

Low Frequency Ultrasonic Multi-mode Lamb-like Wave Method for Characterizing the Ultra-thin Bonding Composite

ZHANG Rui1, WAN Ming-xi1, CAO Wen-wu2   

  1. 1. Department of Biomedical Engineering, Xi'an Jiaotong University, Xi'an, 710049, China;
    2. Intercollege Materials Research Laboratory, Pennsylvania State University, University Park, PA, 16802
  • Received:2000-01-06 Revised:2000-05-14 Online:2001-06-30 Published:2001-06-30

PDF

86

被引次数

5

摘要： 提出用低频超声类兰姆波定征方法来估计超薄黏结复合结构各层与黏结层的厚度、密度、纵波声速和横波声速等参数.采用超声耦合剂耦合方式,结合超声泄漏类兰姆波频域分析方法获取黏结复合结构类兰姆波频散曲线,提出以频散特性为基础的低频超声类兰姆波定征方法和在最小二乘意义下以频散曲线为基础的反向算法对超薄黏结复合结构各层与黏结层进行了参数估计.还分析了影响估计准确性的各种因素,研究了低频超声类兰姆波定征方法对超薄黏结复合结构中各层参数的灵敏度及其在误差传递中的意义.实验结果证实,对于超薄不锈钢/黄铜黏结复合结构,该方法能够准确估计各层h<0.05λ复合结构的声学参数.

关键词: 色散特性, 黏结复合结构, 超声定量无损定征, 超声类兰姆波

Abstract: A low-frequency ultrasonic Lamb-like wave method suitable for characterizing the thickness, density, shear and longitudinal wave velocities of the ultra-thin bonding composite is presented. The dispersion property of the low-frequency Lamb-like wave propagating along the ultra-thin bonding composite is derived, which is the basis of the characterization method. In conjunction with the method of the least square, the secant algorithm is used to estimate each layer's parameters of the ultra-thin bonding composite. The reasons for evaluation error of the parameters and the sensitivity of the method for different parameters are analyzed. Using the ultrasound coupler and a pair of broadband longitudinal wave transducers with 1MHz center frequency, we can successfully estimate the parameters of the ultra-thin bonding layer (with h of each layer smaller than 0.05λ) of the steel/brass composite by employing the leaky guided wave frequency-domain analysis method.

Key words: ultrasonic QNDE, ultrasonic Lamb-like wave, dispersion property, bonding composites

中图分类号: