English

应用科学学报 ›› 2005, Vol. 23 ›› Issue (2): 200-203.

• 论文 • 上一篇    下一篇

大轴直径的高精度多滚轮法测量

金施群, 丁晓牧, 费业泰, 余晓芬, 陈晓怀   

  1. 合肥工业大学仪器仪表学院, 安徽合肥 230009
  • 收稿日期:2003-05-17 修回日期:2004-11-04 出版日期:2005-03-31 发布日期:2005-03-31
  • 作者简介:金施群(1962-),女,安徽歙县人,副教授,E-mail:shq-king@163.com;费业泰(1934-),男,安徽合肥人,教授,博导.
  • 基金资助:
    国防军工计量"十五"重点项目(60104208)

The Precision Measurement for Large Diameters Based on Multi-roller Method

JIN Shi-qun, DING Xiao-mu, FEI Ye-tai, YU Xiao-fen, CHEN Xiao-huai   

  1. The School of Instrumentation, Hefei University of Technology, Hefei 230009, China
  • Received:2003-05-17 Revised:2004-11-04 Online:2005-03-31 Published:2005-03-31

PDF

108

被引次数

5

摘要： 针对单滚轮法的致命缺陷,提出一种多滚轮多传感器冗余测量方案用于大轴直径的高精度测量.所设计方案采用多滚轮和数据融合技术剔除打滑信号,并对温度、压力变形引起的测量误差进行分离与修正,测量精度显著提高.介绍了滚轮法测量原理和测量系统组成,分析了测量误差.实验表明所设计系统的测量精度小于5μm/m.

关键词: 多滚轮法, 大直径, 数据融合, 误差分离与修正

Abstract: A multi-roller and multi-sensor measurement solution based on the analysis on the intrinsic limitations of the single-roller method is proposed to measure the large diameters accurately.In the measurement system designed, the multiple rollers and data fusion technology are used to eliminate the sliding signals, as well as the separating and correcting the measurement errors aroused by the thermal-deformation and pressure deformation to improve the measurement accuracy of the system observably.In this paper, the measurement principle and system of the roller method are introduced and the measurement errors are analyzed.The experimental results show that the measurement accuracy of designed system exceeds 5 μm/m.

Key words: multi-roller method, large diameter, data fusion, error separating and correcting

中图分类号: