English

应用科学学报 ›› 1996, Vol. 14 ›› Issue (1): 53-59.

• 论文 • 上一篇    下一篇

捷联动调陀螺脉冲再平衡回路输出解耦的实现

李宏生   

  1. 东南大学
  • 收稿日期:1994-01-02 出版日期:1996-03-31 发布日期:1996-03-31
  • 作者简介:李宏生:讲师,现在武汉华中理工大学机械学院CAM室,武汉 430074

REALIZATION OF OUTPUT DECOUPLING OF A PULSEREBALANCE LOOP FOR A STRAPDOWN TUNED GYRO

LI HONGSHENG   

  1. Southeast University
  • Received:1994-01-02 Online:1996-03-31 Published:1996-03-31

PDF

55

被引次数

10

摘要： 在捷联系统中,动力调谐陀螺仪的再平衡回路通常接控制解耦设计,输出解耦则通过对回路输出电流数据的处理开环地实现.该文具体讨论了输出解耦的实现途径,建立了解耦运算方程,设计了硬件线路及软件流程图.仿真表明解耦效果较好.方案是可行的.

关键词: 捷联, 再平衡回路, 动力调谐陀螺仪, 输出解耦

Abstract: In strapdown systems, rebalance loops connected with tuned gyros are generally designed based on control decoupling, while output decoupling is realized by proceeding their output current data. This paper discusses the realization means of output decoupling in detail,establishes the computation equations,designs the hardware construction and software flow chart.Simulation shows that the effects of decoupling are satisfying. The described plan therefore is feasible.

Key words: tuned gyro, rebalance loop, output decoupling, strapdonw