English

应用科学学报 ›› 1995, Vol. 13 ›› Issue (3): 363-368.

• 论文 • 上一篇    下一篇

低速正交金属切削中工件表层加工硬化深度的预报

杨继昌1, 刘伟成2   

  1. 1. 江苏理工大学;
    2. 香港理工学院
  • 收稿日期:1993-07-12 修回日期:1994-04-28 出版日期:1995-09-30 发布日期:1995-09-30

A PREDICTION OF SURFACE WORK-HARDENING DEPTH IN LOW SPEED ORTHOGONAL METAL CUTTING

YANG JICHANG1, LIU WEICHENG2   

  1. 1. Jiangsu University of Science and Technology;
    2. Hong Kong Polytechnic
  • Received:1993-07-12 Revised:1994-04-28 Online:1995-09-30 Published:1995-09-30

PDF

86

被引次数

17

摘要： 该文根据金属塑性变形理论,详细描述了金属切削变形区内的弹塑性应力场,确定了低速正交金属切削时工件表面层加工硬化深度的预报准则,并利用有限元法模拟已加工表面的形成过程,获得了加工硬化深度的数值解。

关键词: 有限元法, 加工硬化, 低速正交切削

Abstract: Based on the theory of metal plastic formation,the paper describes the elastio-plastic stress field in the metal cutting deformation zone in great detail.A criterion for predicting the surface work-hardening depth in low speed orthogonal cutting is determined.The numerical solution of surface work-hardening depth is obtained by simulating the machined surface formation process.

Key words: low speed orthogonal cutting, work-hardening, finite element method