收稿日期: 2016-03-06
修回日期: 2016-04-09
网络出版日期: 2017-05-30
基金资助
航空科学基金（No.2016ZD56008， No.2013ZD02001）；江西省教育厅科学技术研究项目基金（No.GJJ-14519）资助
Low Speed Rolling Bearing Fault Diagnosis Based on Frequency Bands Energy Features
Received date: 2016-03-06
Revised date: 2016-04-09
Online published: 2017-05-30
直升机自动倾斜器滚动轴承通常在低速环境下工作，其故障特征频率易淹没在各种干扰频率中，因此以特征频率处的谱峰作为故障特征的传统诊断方法效果不佳。为此提出一种基于频段能量特征的低速滚动轴承故障诊断方法。计算振动信号的FFT和功率谱，利用轴承正常、内圈故障、外圈故障和滚珠故障4种状态的振动信号在功率谱上能量分布不同的特点，构建故障特征向量。利用具有小样本优势的支持向量机构建分类器，进行故障类型诊断。在实验台上模拟直升机自动倾斜器滚动轴承的低速工作环境，进行了故障模拟实验，采集振动数据，与传统LMD包络谱特征方法进行对比，验证了该方法在低速滚动轴承故障诊断方面的适应性和优越性。
熊邦书, 吴强镪, 李新民, 莫燕, 黄建萍 . 基于频段能量特征的低速滚动轴承故障诊断[J]. 应用科学学报, 2017 , 35(3) : 366 -372 . DOI: 10.3969/j.issn.0255-8297.2017.03.010
When the rolling bearing of a helicopter swash plate works in a low speed environment, the characteristic frequency of faults completely submerged in various interferences, making the traditional diagnosis method depending on spectral peaks of characteristic frequencies ineffective. To solve the problem, a low speed rolling bearing fault diagnosis method based on frequency bands energy features is proposed. FFT and power spectrum of the fault signal are calculated. Energy distribution characteristics in the signals of four kinds of vibrations, i.e., normal, inner ring, outer ring and ball fault, are used to construct a fault feature vector. Finally, support vector machine (SVM), which can use small scale samples, is used to construct a classifer used for determining the type of fault. On an experimental platform, simulation test was carried out in a low speed working environment of rolling bearing of a helicopter swash plate. Analysis of the collected vibration signals shows that, compared with the traditional LMD and envelope spectrum characteristics method, the adaptability and superiority of the proposed method in low speed rolling bearing fault diagnoses are verifed.
[1] 倪先平. 直升机手册[M]. 北京:航空工业出版社,2003.
[2] 朱可恒. 滚动轴承振动信号特征提取及诊断方法研究[D]. 大连:大连理工大学,2013.
[3] 马新娜,杨绍普. 滚动轴承复合故障诊断的自适应方法研究[J]. 振动与冲击,2016, 35(10):145-150. Ma X N, Yang S P. Study of adaptive compound fault diagnosis of rolling bearing[J]. Journal of Vibration and Shock, 2016, 35(10):145-150. (in Chinese)
[4] Feng Z P, Liang M, Chu F L. Recent advances in time-frequency analysis methods for machinery fault diagnosis:a review with application examples[J]. Mechanical Systems and Signal Processing, 2013, 38(1):165-205.
[5] 程军圣,于德介,杨宇. 基于SVM和EMD包络谱的滚动轴承故障诊断方法[J]. 系统工程理论与实践,2005, 9(6):131-136. Cheng J S, Yu D J, Yang Y. A fault diagnosis approach for roller bearing based on SVM and EMD envelope spectrum[J]. Systems Engineering-Theory and Practice, 2005, 9(6):131-136. (in Chinese)
[6] 杨宇,王欢欢,程军圣. 基于LMD的包络谱特征值在滚动轴承故障诊断中的应用[J]. 航空动力学报,2012, 27(5):1153-1158. Yang Y, Wang H H, Cheng J S. Application of envelope spectrum characteristics based on LMD to roller bearing fault diagnosis[J]. Journal of Aerospace Power, 2012, 27(5):1153-1158. (in Chinese)
[7] Zhu K H, Song X G, Xue D X. A roller bearing fault diagnosis method based on hierarchical entropy and support vector machine with particle swarm optimization algorithm[J]. Measurement, 2014, 47(1):669-675.
[8] Poursaeidi M H, Kundakcioglu O E. Robust support vector machines for multiple instance learning[J]. Annals of Operations Research, 2014, 216(1):205-227.
[9] 向阳辉,张干清,庞佑霞. 结合SVM和改进证据理论的多信息融合故障诊断[J]. 振动与冲击,2015, 34(13):71-77. Xiang Y H, Zhang G Q, Pang Y X. Fault diagnosis of multi-information fusion by SVM & improved evidence theory[J]. Journal of Vibration and Shock, 2015, 34(13):71-77. (in Chinese)
[10] 姜久亮,刘文艺,侯玉洁. 基于内积延拓LMD及SVM的轴承故障诊断方法研究[J]. 振动与冲击,2016, 35(6):104-108. Jiang J L, Liu W Y, Hou Y J. Research on bearing fault diagnosis method based on integral waveform extension LMD and SVM[J]. Journal of Vibration and Shock, 2016, 35(6):104-108. (in Chinese)
[11] Wang Y S, Ma Q H, Zhu Q. An intelligent approach for engine fault diagnosis based on HilbertHuang transform and support vector machine[J]. Applied Acoustics, 2014, 75(1):1-9.
/
| 〈 |
|
〉 |
