考虑受热和受力变形的公差与配合设计

Journal of Applied Sciences ›› 2000, Vol. 18 ›› Issue (2): 153-155.

• Articles • Previous Articles Next Articles

Tolerance and Fit Design in Consideration of Thermal and Assembling Deformation

HU Peng-hao, FEI Ye-tai, HUANG Qi-sheng

Department of Precision Instrument, Hefei University of Technology, Hefei 230009, China

Received:1998-11-21 Revised:1999-09-15 Online:2000-06-30 Published:2000-06-30

Abstract

CLC Number:

TH133.31

HU Peng-hao, FEI Ye-tai, HUANG Qi-sheng. Tolerance and Fit Design in Consideration of Thermal and Assembling Deformation[J]. Journal of Applied Sciences, 2000, 18(2): 153-155.

[1]	LUO Zai, FEI Ye-tai, MIAO En-ming. Thermal Deformation of Hollow Parts in an Uneven Steady-State Temperature Field [J]. Journal of Applied Sciences, 2005, 23(4): 424-427.
[2]	MIAO En-ming, FEI Ye-tai. An Analysis of the Stepped Shaft's Heat Transfer [J]. Journal of Applied Sciences, 2003, 21(3): 317-321.
[3]	HUANG Qi-sheng, FEI Ye-tai, ZHANG Yong, HU Peng-hao. Accurate Measurement of the Coefficient of Thermal Deformation for Metal [J]. Journal of Applied Sciences, 2002, 20(1): 109-110.
[4]	HUANG QISHENG, FEI YETAI, HU PENGHAO, HUANG QIANGXIAN. The Influence of the Residual Stress on the Thermal Deformation for the Geometric Figure [J]. Journal of Applied Sciences, 1998, 16(3): 366-371.
[5]	LU RONGSHENG, FEI YETAI. THE SCIENTIFIC DEFINITION AND APPLICATIONS OF LINEAR THERMAL EXPANSION COEFFICIENT OF MATERIAL [J]. Journal of Applied Sciences, 1996, 14(3): 253-258.

Tolerance and Fit Design in Consideration of Thermal and Assembling Deformation

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 5

Recommended Articles

Metrics

Comments