应用科学学报 ›› 2011, Vol. 29 ›› Issue (1): 15-21.doi: 10.3969/j.issn.0255-8297.2011.01.003

• 通信工程 • 上一篇    下一篇

室内中继网络部署及其优化

裴郁杉1;2, 田辉1;2, 王莹1;2, 宋磊1;2   

  1. 1. 北京邮电大学无线新技术研究所,北京100876
    2. 北京邮电大学泛网无线通信教育部重点实验室,北京100876
  • 收稿日期:2010-09-10 修回日期:2010-12-23 出版日期:2011-01-26 发布日期:2011-01-25
  • 作者简介:裴郁杉,博士生,研究方向:无线协作通信网络及其资源管理. E-mail: peiyujin@gmail.com;田辉,博士,教授,博导,研究 方向:4G/Beyond 3G 媒体接入控制技术、自组织移动通信网络、宽带无线通信技术等,E-mail:tianhui@bupt.edu.cn
  • 基金资助:

    工信部新一代宽带无线移动通信网国家科技重大专项基金(No.2009ZX03003-003-01); 北京市科技新星计划基金(No.2007B053);新世纪优秀人才计划基金(No.NCET-10-0242)资助

Research and Optimization of Indoor Relay Network Deployment

PEI Yu-shan1;2, TIAN Hui1;2, WANG Ying1;2, SONG Lei1;2   

  1. 1.Wireless Technology Innovation Institute, Beijing University of Posts and Telecommunications,
    Beijing 100876, China
    2. Key Laboratory of Universal Wireless Communications, Ministry of Education, Beijing University of
    Posts and Telecommunications, Beijing 100876, China
  • Received:2010-09-10 Revised:2010-12-23 Online:2011-01-26 Published:2011-01-25

摘要:

针对室内复杂的无线传输环境和较大的吞吐量要求,该文提出在室内场景中部署中继以提升吞吐量和覆盖范围,并对大型室内场所的无线传输环境进行建模,改变其中的参数以适应不同的实际环境. 以大办公室环境为例,提出一种室内中继部署和优化方案及其仿真方法,根据对系统性能需求的预测求得各接入点的部署数量、位置和中继工作模式. 仿真结果表明,在室内环境中部署中继可有效提高系统吞吐量和覆盖面积. 综合考虑系统性能要求和网络成本,使用1 个基站和4 个放大-转发中继站共同覆盖为理想的网络部署方案.
Abstract: 收稿日期:; 修订日期:基金项目:作者简介:

关键词: 室内, 中继网络, 部署, 建模, 覆盖

Abstract:

To deal with complex indoor wireless environments and high throughput requirements, deployment of indoor relay networks is investigated. A mathematical model is established for large office buildings, with adaptively changed parameters are adaptive to meet the practical conditions. As an example, relay network deployment in an indoor scenario with a large local environment is considered. With the proposed model, the number of access points, the locations of deployment, and the selection of relay work modes are derived based on the system performance requirements. The simulation results show that deploying relay stations in the studied environment can effectively improve the system throughput and coverage. Taking both systemperformance and network-cost into account, one base station and four amplify-forward relay stations can form an ideal deployment.

Key words:  indoor, relay networks, deployment, modeling, coverage

中图分类号: