掺铝锗芯光纤芯包交界区域热处理过程中的动力学仿真

doi:10.3969/j.issn.0255-8297.2026.02.002

应用科学学报 ›› 2026, Vol. 44 ›› Issue (2): 198-207.doi: 10.3969/j.issn.0255-8297.2026.02.002

掺铝锗芯光纤芯包交界区域热处理过程中的动力学仿真

钟双栖^1,2,3, 杜亦凡^1,2,3, 马泽成^1,2,3, 徐思涛^1,2,3, 赵子文^1,2,3

1. 上海大学特种光纤与光接入网重点实验室, 上海 200444;
2. 上海大学特种光纤与先进通信国际合作联合实验室, 上海 200444;
3. 上海大学上海先进通信与数据科学研究院, 上海 200444

收稿日期:2024-07-09 发布日期:2026-04-07
通信作者: 赵子文，副教授，研究方向为特种光纤及相关器件。E-mail:zhzwen@shu.edu.cn E-mail:zhzwen@shu.edu.cn
基金资助:
国家自然科学基金（No.61975114）

Dynamic Simulation of Heat Treatment Process in Core-Cladding Junction Region of Aluminum-Doped Germanium-Core Optical Fibers

ZHONG Shuangqi^1,2,3, DU Yifan^1,2,3, MA Zecheng^1,2,3, XU Sitao^1,2,3, ZHAO Ziwen^1,2,3

1. Key Laboratory of Specialty Fiber Optics and Optical Access Networks, Shanghai University, Shanghai 200444, China;
2. Joint International Research Laboratory of Specialty Fiber Optics and Advanced Communication, Shanghai University, Shanghai 200444, China;
3. Shanghai Institute for Advanced Communication and Data Science, Shanghai University, Shanghai 200444, China

Received:2024-07-09 Published:2026-04-07

摘要/Abstract

摘要： 针对锗芯光纤内pn结器件的热处理制备和改性问题，本文选择光纤包层和纤芯交界区域这一特殊位置，以一种典型的p型锗材料中的受主元素铝作为掺杂元素，使用Materials studio软件建立掺铝（Al）的锗（Ge）/二氧化硅（SiO₂）界面模型，从不同温度出发模拟锗芯光纤热处理过程中该区域的动力学过程。选择热处理温度分别为500℃、600℃、660℃、700℃、727℃、827℃的6组样品，分析了不同温度下掺杂原子Al的均方根位移、扩散系数、掺Al的Ge/SiO₂结构晶胞参数变化。研究发现：当温度处于500℃、600℃、660℃时，Al原子在结构中的扩散程度逐渐减小；当温度处于700℃、727℃和827℃时，Al原子的扩散程度增大。该结果初步说明了由温度升高引起的掺杂原子位移会使晶体中原子位置发生变化，从而造成锗芯光纤内pn结性能的改变。此外，研究了掺Al的Ge/SiO₂结构的应力变化以及应力-应变关系，发现锗芯光纤内应力表现为拉应力，该拉应力随温度的变化趋势与结构晶胞参数变化相印证，且不同温度下的应力与应变成正比。在500℃、600℃、660℃、700℃、727℃温度下，温度越高，弹性模量越小；当温度达到827℃，弹性模量增大。本研究结果对半导体芯光纤内结型器件的热处理优化改性具有重要意义。

关键词: 锗芯光纤, 光纤内pn结器件, 热处理, 分子动力学仿真

Abstract: For the heat treatment preparation and modification of pn junction devices in germanium-core fibers, this study selected the core-cladding junction region as the research focus and adopted a typical p-type germanium material with the host element aluminum as the doping element. An aluminum (Al)-doped germanium (Ge)/silicon dioxide (SiO₂) interface model was established by using Materials studio software. Dynamic simulations of the heat treatment process for pn junctions in germanium-core fibers were conducted at different temperatures, specifically 500 ℃, 600 ℃, 660 ℃, 700 ℃, 727 ℃, and 827 ℃. The mean square displacement of the dopant atoms Al, diffusion coefficients, and cellular parameter changes of the Al-doped Ge/SiO₂ structure were analyzed at different temperatures. It was observed that the diffusion of Al atoms in the structure decreased progressively at 500 ℃, 600 ℃, and 660 ℃, while it increased at 700 ℃, 727 ℃, and 827 ℃. This phenomenon preliminarily indicates the displacements of dopant atoms induced by the temperature increase lead to changes of atomic positions in the crystals and ultimately result in the alteration of the properties of pn junctions within germanium-core fibers. Moreover, the stress variations and stress-strain relationship of the Al-doped Ge/SiO₂ structure were investigated. It was found that the internal stress in germanium-core optical fiber is manifested as tensile stress and the trend of tensile stress with temperature is consistent with the changes in structural cell parameters. Additionally, the stress-strain relationship was observed to be proportional at different temperatures. For temperatures of 500 ℃, 600 ℃, 660 ℃, 700 ℃, and 727 ℃, the elastic modulus decreases as the temperature rises; however, when the temperature reached 827 ℃, the elastic modulus increased. These findings provide important insights for optimizing the heat treatment modification of junction-type devices in semiconductor-core fibers.

Key words: germanium-core optical fiber, pn junction device in optical fiber, heat treatment, molecular dynamics simulation

中图分类号:

TN389

钟双栖, 杜亦凡, 马泽成, 徐思涛, 赵子文. 掺铝锗芯光纤芯包交界区域热处理过程中的动力学仿真[J]. 应用科学学报, 2026, 44(2): 198-207.

ZHONG Shuangqi, DU Yifan, MA Zecheng, XU Sitao, ZHAO Ziwen. Dynamic Simulation of Heat Treatment Process in Core-Cladding Junction Region of Aluminum-Doped Germanium-Core Optical Fibers[J]. Journal of Applied Sciences, 2026, 44(2): 198-207.

参考文献

[1] Hu L, Pasta M, La M F, et al. Stretchable, porous, and conductive energy textiles [J]. Nano Letters, 2010, 10(2): 708-714.
[2] Mcalpine M C, Ahmad H, Wang D, et al. Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors [J]. Nature Materials, 2007, 6(5): 379-384.
[3] Kim D H, Xiao J, Song J, et al. Stretchable, curvilinear electronics based on inorganic materials [J]. Advanced Materials, 2010, 22(19): 2108-2124.
[4] Abouraddy A F, Bayindir M, Benoit G, et al. Towards multimaterial multifunctional fibres that see, hear, sense and communicate [J]. Nature Materials, 2007, 6(5): 336-347.
[5] Zhang J, Wang Z, Wang Z, et al. In-fibre particle manipulation and device assembly via laser induced thermocapillary convection [J]. Nature Communications, 2019, 10(1): 5206.
[6] Rein M, Favrod V D, Hou C, et al. Diode fibres for fabric-based optical communications [J]. Nature, 2018, 560(7717): 214-218.
[7] Song S, Lonsethagen K, Laurell F, et al. Laser restructuring and photoluminescence of glass-clad GaSb/Si-core optical fibres [J]. Nature Communications, 2019, 10(1): 1790.
[8] Sutmann G. Classical molecular dynamics [M]//Grotendorst J, Marx D, Muramatsu A. Quantum simulations of complex many-body systems: from theory to algorithms. Jülich: John von Neumann Institute for Computing, 2002: 211-254.
[9] 闻立时. 固体材料界面研究的物理基础[M]. 北京: 科学出版社, 1991.
[10] 张金平, 张洋洋, 李慧, 等. 纳米铝热剂Al/SiO₂层状结构铝热反应的分子动力学模拟[J]. 物理学报, 2014, 63(8): 342-350. Zhang J P, Zhang Y Y, Li H, et al. Molecular dynamics investigation of thermite reaction behavior of nanostructured Al/SiO₂ system [J]. Acta Physica Sinica, 2014, 63(8): 342-350. (in Chinese)
[11] 任二花, 李晓延, 张虎, 等. 空位对Cu/Sn焊点中Cu₃Sn层元素扩散的影响[J]. 电子元件与材料, 2022, 41(4): 381-386. Ren E H, Li X Y, Zhang H, et al. Effect of vacancy on elements diffusion in Cu₃Sn layers for Cu/Sn solder joints [J]. Electronic Components and Materials, 2022, 41(4): 381-386. (in Chinese)
[12] Chroneos A, Bracht H. Diffusion of n-type dopants in germanium [J]. Applied Physics Reviews, 2014, 1(1): 011301.
[13] Chen P L, Chen I W. Grain growth in CeO₂: dopant effects, defect mechanism, and solute drag [J]. Journal of the American Ceramic Society, 1996, 79: 1793-1800.
[14] 关振铎. 无机材料物理性能[M]. 北京: 清华大学出版社, 1992.
[15] Wu W P, Yao Z Z. Molecular dynamics simulation of stress distribution and microstructure evolution ahead of a growing crack in single crystal nickel [J]. Theoretical and Applied Fracture Mechanics, 2012, 62: 67-75.
[16] Born M, Huang K. Dynamical theory of crystal lattices [M]. New York: Oxford University Press, 1996.
[17] Adnan A, Sun C T, Mahfuz H. A molecular dynamics simulation study to investigate the effect of filler size on elastic properties of polymer nanocomposites [J]. Composites Science and Technology, 2007, 67(3/4): 348-356.
[18] Zhao Y Y, Nieh T G. Correlation between lattice distortion and friction stress in Ni-based equiatomic alloys [J]. Intermetallics, 2017, 86: 45-50.
[19] Vanhellemont J, Kamiyama E, Nakamura K, et al. Impacts of thermal stress and doping on intrinsic point defect properties and clustering during single crystal silicon and germanium growth from a melt [J]. Journal of Crystal Growth, 2017, 474: 96-103.
[20] Roylance D. Stress-strain curves [EB/OL]. [2024-07-09]. https://ocw.mit.edu/courses/3-11-mechanics-of-materials-fall-1999/resources/mit3_11f99_ss/.
[21] Gladden J R, Li G, Adebisi R, et al. High-temperature elastic moduli of bulk nanostructured n- and p-type silicon germanium [J]. Physical Review B, 2010, 82(4): 045209.
[22] Willis B T M, Pryor A W. Thermal vibrations in crystallography [M]. Cambridge: Cambridge University Press, 1975.

掺铝锗芯光纤芯包交界区域热处理过程中的动力学仿真

Dynamic Simulation of Heat Treatment Process in Core-Cladding Junction Region of Aluminum-Doped Germanium-Core Optical Fibers

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	赵子文, 茅煜季哲, 程雪丽, 陈娜, 董艳华, 王廷云. 锗芯光纤的CO₂激光退火温场分布仿真[J]. 应用科学学报, 2018, 36(3): 443-450.
[2]	刘茜, 高濂, 严东生, H MANDAL, D P THOMPSON. 热历史对Sialon/SiC_(p)复合陶瓷的相稳定性及力学性能的影响[J]. 应用科学学报, 1996, 14(4): 385-390.